How to Repair Dodgy or Broken Headphones: Part-1

Author Topic: How to Repair Dodgy or Broken Headphones: Part-1  (Read 538 times)

Offline Md. Abrar Amin

  • Full Member
  • ***
  • Posts: 101
  • Optimistic
    • View Profile
    • Md. Abrar Amin
How to Repair Dodgy or Broken Headphones: Part-1
« on: April 22, 2017, 12:12:08 PM »
That horrible day has to occur at some point -- when your headphones or ear buds finally start calling it quits. Luckily, you don't have to rush out and buy a new pair! You may be able to fix it yourself, after a stop at an electronics store. The parts you'll be repairing are delicate, so there is risk of damage. But if your headphones are already broken, you don't have much to lose.

1
Listen while bending the cable. Bend the cable while you listen. If you can hear some audio through your headphones, move on to Fixing the cable, below.
Md. Abrar Amin
Lecturer
Department of Electrical and Electronic Engineering
Faculty of Engineering
Daffodil International University (DIU)
Room # 601, Level-6, Main Campus
102, Shukrabad, Dhaka -1207
Mobile: +8801936556880