How to Repair Dodgy or Broken Headphones: Part-4

Author Topic: How to Repair Dodgy or Broken Headphones: Part-4  (Read 62 times)

Offline Md. Abrar Amin

  • Full Member
  • ***
  • Posts: 101
  • Optimistic
    • View Profile
    • Md. Abrar Amin
How to Repair Dodgy or Broken Headphones: Part-4
« on: April 22, 2017, 12:13:32 PM »
Set up a multimeter. If you haven't found the problem yet, use a multimeter. You can find one at a hardware store. You'll need a sharp knife as well, so children should ask an adult for help. Set up the multimeter as follows:
Set the multimeter to test continuity, marked by ))) or a similar symbol.
Plug the black lead into the hole marked COM.
Plug the red lead into the hole marked with an Ω, mA, or ))).
Md. Abrar Amin
Lecturer
Department of Electrical and Electronic Engineering
Faculty of Engineering
Daffodil International University (DIU)
Room # 601, Level-6, Main Campus
102, Shukrabad, Dhaka -1207
Mobile: +8801936556880