How to Repair Dodgy or Broken Headphones: Part-8

Author Topic: How to Repair Dodgy or Broken Headphones: Part-8  (Read 308 times)

Offline Md. Abrar Amin

  • Full Member
  • ***
  • Posts: 101
  • Optimistic
    • View Profile
    • Md. Abrar Amin
How to Repair Dodgy or Broken Headphones: Part-8
« on: April 22, 2017, 12:15:32 PM »
Cut the cord. Cut the cord in half. If the wire inside is shredded, cut on either side of it to remove the problem. If you do this, remove the same amount from the left and right cords. Uneven lengths of cord can cause electrical damage to your headphones.[3]
If only one of your wires is broken, you might want to skip to soldering the wire, without cutting or splicing.[4] This will save time, but the repair will be less sturdy.
Md. Abrar Amin
Lecturer
Department of Electrical and Electronic Engineering
Faculty of Engineering
Daffodil International University (DIU)
Room # 601, Level-6, Main Campus
102, Shukrabad, Dhaka -1207
Mobile: +8801936556880