Faculty of Engineering > EEE

How to Repair Dodgy or Broken Headphones: Part-7

(1/1)

Md. Abrar Amin:

Strip off insulation. Use wire strippers, or carefully run a knife around the outside of the cable. Remove ½ inch (1.25 cm) of the outer shielding. Extend the cut in either direction until you see a broken wire. This is the area you'll need to repair.
If your cable looks like two cables glued together, each one will contain an insulated wire (the signal) and a bare wire (the ground).
Apple headphones and other headphones with single cables have two insulated wires (the left and right signal) and a single bare ground wire.

Navigation

[0] Message Index