How to Repair Dodgy or Broken Headphones: Part-17

Author Topic: How to Repair Dodgy or Broken Headphones: Part-17  (Read 814 times)

Offline Md. Abrar Amin

  • Full Member
  • ***
  • Posts: 101
  • Optimistic
    • View Profile
    • Md. Abrar Amin
How to Repair Dodgy or Broken Headphones: Part-17
« on: April 22, 2017, 12:19:32 PM »

Clamp the wires onto the pins. Use a small clip or vise to keep them firmly in place. None of the three wires should touch the other two.
Solder the wires to the plug. Use sandpaper to roughen the edges to make it easier to solder to metal. Apply solder to a pin. Heat the pin to melt the solder. Repeat for the other two wires.
Md. Abrar Amin
Lecturer
Department of Electrical and Electronic Engineering
Faculty of Engineering
Daffodil International University (DIU)
Room # 601, Level-6, Main Campus
102, Shukrabad, Dhaka -1207
Mobile: +8801936556880