Lean Manufacturing

Author Topic: Lean Manufacturing  (Read 3346 times)

Offline asitrony

  • Hero Member
  • *****
  • Posts: 547
    • View Profile
Lean Manufacturing
« on: September 18, 2018, 05:31:49 PM »
A Comprehensive Study on Lean Manufacturing Process
Lean Manufacturing:

Lean Manufacturing – A way to eliminate waste and improve efficiency in a manufacturing environment. Lean focuses on flow, the value stream and eliminating ‘muda’, the Japanese word for waste. Lean manufacturing is the production of goods using less of everything compared to traditional mass production: less waste, human effort, manufacturing space, investment in tools, inventory, and engineering time to develop a new product. Lean is the systematic approach to identifying and eliminating waste through continuous improvement by flowing the product or service at the pull of your customer in pursuit of perfection.

During II world war, the economic condition of Japan was heavily destroyed. They had limited infrastructure, inventories, machine & materials. So they decided to produce a small batch of products which would reduce inventories; it means they would need less capital to produce the same product. Lean manufacturing is a management philosophy derived mostly from the Toyota Production System(TPS) because Toyota Motor Company’s Eiji Toyoda and Taiichui Ohno are given credit for its approach and innovations, this system identified as "lean" only in the 1990s.

Areas of Lean:
   Quality- Increasing quality.
   Cost- Reducing cost.
   Productivity- Increasing productivity.
   Safety and morale- Ensuring safety.

Waste elimination:
Waste is anything that happens to a product that does not add value from the customer’s perspective. Products being stored, inspected or delayed, products waiting in queues, and defective products do not add value. There are seven major types of waste –
   Overproduction – Producing more than the customer orders or producing too early. Inventory of any kind is usually wastage. TPS pays particular attention to the waste of overproduction.
   Queues – Time is a limited resource. In the manufacturing world, time is money. Customer requirements are calculated to the second. Idle time, storage, and waiting are wastes.
   Transportation – Moving material between plants, between work centers, and handling more than once is waste.
   Inventory – Preventing unnecessary inventory is critical to the success of the Toyota Production System. The smooth, continuous flow of work through each process ensures that excess amounts of inventory are minimized unnecessary raw material, work-in process (WIP), finished goods, and excess operating supplies are wastes.
   Motion –Motion is the movement of equipment or people. Wasted motion occupies time and energy. Ideally all unnecessary movements or actions are eliminated from the work process.
   Over-processing – It refers to the works performed on product that adds no value. Over processing is as wasteful as insufficient processing. Employees must learn to identify over processing waste.
   Defective product – The waste of correction is a result of poor internal quality. Producing defective products or products requiring repairs adds the cost of extra manpower, materials, facilities and conveyance measures.
Advantages of Lean Manufacturing:
   Increased overall productivity.
   Reduced amount of floor space required for production.
   Reduced manufacturing lead time.
   Improved flexibility to react to changes in production flow.
   Improved quality of the product.
Disadvantages of Lean Manufacturing:
   Difficulty involved with changing processes to implement lean principals.
   Long term commitment required for permanent change.
   Very risky process in case of supply chain issues while changing over to lean.

Engr. Asit Ghosh
Assistant Professor, TE

Offline subrata.te

  • Full Member
  • ***
  • Posts: 151
  • Don't believe, until you have experienced it.
    • View Profile
    • Personal Website
Re: Lean Manufacturing
« Reply #1 on: February 22, 2019, 12:54:21 PM »
Informative one Sir. Thanks for sharing.
- Subrata Majumder
 Lecturer, Dept. of Textile Engineering
 e-mail: subrata.te@diu.edu.bd
 Cell: +8801710541657

Offline Sumon Mazumder

  • Jr. Member
  • **
  • Posts: 64
    • View Profile
Re: Lean Manufacturing
« Reply #2 on: March 27, 2019, 04:15:29 PM »
Very good topic indeed !!!
Thanks Asit Sir for sharing the essential topic with us that will enrich the knowledge of the students in the fileds of Lean manufacturing and Lean management.

Offline fahmidasiddiqa

  • Full Member
  • ***
  • Posts: 229
  • Test
    • View Profile
Re: Lean Manufacturing
« Reply #3 on: April 06, 2019, 11:40:13 AM »
thanks for sharing

Offline Md. Saiful Hoque

  • Sr. Member
  • ****
  • Posts: 283
    • View Profile
Re: Lean Manufacturing
« Reply #4 on: April 11, 2019, 11:24:21 PM »
Informative. Thanks for sharing
Department of TE,
Faculty of Engineering, DIU

Offline kamrulislam.te

  • Full Member
  • ***
  • Posts: 212
  • Success doesn't come to u, u have to go after it.
    • View Profile
Re: Lean Manufacturing
« Reply #5 on: March 10, 2020, 08:29:14 PM »
Too much informative😇😇
Thank you sir for sharing this topic😊
Md. Kamrul Islam
Lecturer, Department of Textile Engineering
Faculty of Engineering, DIU
Cell : +8801681659071
Email: kamrulislam.te@diu.edu.bd