Daffodil International University

Faculty of Engineering => Textile Engineering => Topic started by: Md. Al-Amin on June 06, 2018, 03:07:42 PM

Title: Important points regarding the Burnout print.
Post by: Md. Al-Amin on June 06, 2018, 03:07:42 PM

1. Burnout print is not possible on 100% cotton fabric. Clothes should be PC or CVC
2. 60% polyester 40% cotton is the best composition for Burnout print.
3. Process loss is very high. More than 35%
4. Single jersey construction is the best construction for Burnout print.
5. If you need the finished fabric with 120 to 130 GSM then you should knit the fabric with 160 to 170 GSM.
6. Burnout print is not only expensive but also lucrative with nice feelings.

Title: Re: Important points regarding the Burnout print.
Post by: Kazi Rezwan Hossain on July 04, 2018, 12:16:25 PM

infomative

Title: Re: Important points regarding the Burnout print.
Post by: parvez.te on July 14, 2018, 11:44:10 AM

Nice one...

Title: Re: Important points regarding the Burnout print.
Post by: Sharminte on August 01, 2018, 11:11:46 AM

thanks for sharing

Title: Re: Important points regarding the Burnout print.
Post by: Md. Al-Amin on October 13, 2018, 02:38:55 PM

Thanks..