How to Repair Dodgy or Broken Headphones: Part-14

Author Topic: How to Repair Dodgy or Broken Headphones: Part-14  (Read 483 times)

Offline Md. Abrar Amin

  • Full Member
  • ***
  • Posts: 101
  • Optimistic
    • View Profile
    • Md. Abrar Amin
How to Repair Dodgy or Broken Headphones: Part-14
« on: April 22, 2017, 12:18:21 PM »
Strip the wire with wire strippers. There will normally be one "loose" wire (unshielded) and two insulated, or shielded, wires. The bare one will be the earth or ground wire, the others are left signal and right signal.
Side-by-side cables have an additional bare wire, but are otherwise the same as single cables.
Md. Abrar Amin
Lecturer
Department of Electrical and Electronic Engineering
Faculty of Engineering
Daffodil International University (DIU)
Room # 601, Level-6, Main Campus
102, Shukrabad, Dhaka -1207
Mobile: +8801936556880