While you’re up, print me a solar cell

Author Topic: While you’re up, print me a solar cell  (Read 171 times)

Offline Rohan Sarker

  • Full Member
  • ***
  • Posts: 100
  • Test
    • View Profile
While you’re up, print me a solar cell
« on: May 09, 2018, 01:26:17 PM »

The new technology, developed by a team of researchers at MIT, is reported in a paper in the journal Advanced Materials, published online July 8. The paper is co-authored by Karen Gleason, the Alexander and I. Michael Kasser Professor of Chemical Engineering; Professor of Electrical Engineering Vladimir Bulović; graduate student Miles Barr; and six other students and postdocs. The work was supported by the Eni-MIT Alliance Solar Frontiers Program and the National Science Foundation.

The technique represents a major departure from the systems used until now to create most solar cells, which require exposing the substrates to potentially damaging conditions, either in the form of liquids or high temperatures. The new printing process uses vapors, not liquids, and temperatures less than 120 degrees Celsius. These “gentle” conditions make it possible to use ordinary untreated paper, cloth or plastic as the substrate on which the solar cells can be printed.

It is, to be sure, a bit more complex than just printing out a term paper. In order to create an array of photovoltaic cells on the paper, five layers of material need to be deposited onto the same sheet of paper in successive passes, using a mask (also made of paper) to form the patterns of cells on the surface. And the process has to take place in a vacuum chamber.

The basic process is essentially the same as the one used to make the silvery lining in your bag of potato chips: a vapor-deposition process that can be carried out inexpensively on a vast commercial scale.

The resilient solar cells still function even when folded up into a paper airplane. In their paper, the MIT researchers also describe printing a solar cell on a sheet of PET plastic (a thinner version of the material used for soda bottles) and then folding and unfolding it 1,000 times, with no significant loss of performance. By contrast, a commercially produced solar cell on the same material failed after a single folding.

“We have demonstrated quite thoroughly the robustness of this technology,” Bulović says. In addition, because of the low weight of the paper or plastic substrate compared to conventional glass or other materials, “we think we can fabricate scalable solar cells that can reach record-high watts-per-kilogram performance. For solar cells with such properties, a number of technological applications open up,” he says. For example, in remote developing-world locations, weight makes a big difference in how many cells could be delivered in a given load

Offline fahad.faisal

  • Hero Member
  • *****
  • Posts: 734
  • Believe in Hard Work and Sincerity.
    • View Profile
Re: While you’re up, print me a solar cell
« Reply #1 on: May 24, 2018, 11:44:49 PM »
Thanks for the informative post.
Fahad Faisal
Department of CSE

Offline Nahid_EEE

  • Full Member
  • ***
  • Posts: 140
  • Lecturer, Dept. of EEE
    • View Profile
Re: While you’re up, print me a solar cell
« Reply #2 on: May 26, 2018, 06:10:05 PM »
Thank you for your information.
M. Nahid Reza
Dept. of EEE