Publication of an article in a Scopus Indexed Journal

Author Topic: Publication of an article in a Scopus Indexed Journal  (Read 82 times)

Offline Shahrear.ns

  • Sr. Member
  • ****
  • Posts: 430
  • Plan living, High Thinking, Love After Marriage !!
    • View Profile
    • Shahrear Khan Rasel
Publication of an article in a Scopus Indexed Journal
« on: October 31, 2020, 12:04:57 PM »
Title: Natural convective heat transfer in a nanofluid-filled square vessel having a
wavy upper surface in the presence of a magnetic field

Authors: M.J. Uddin, S.K. Rasel, M.M. Rahman, K. Vajraveluc

Abstract: Copper oxide makes an excellent nanomaterial for various efficient heat transfer devices because of its high
specific surface area, lightweight, high specific heat capacity, and high thermal conductivity. Heat transfer intensification
using nanofluids has strong potential to improve innovative cost-efficient chilling technologies. The
present study aims to analyze the heat transfer intensifications for various parameter settings in a practical
application. In recognition of possible applications, the problem of natural convective heat transfer in a copper
oxide nanofluid-filled square vessel having the wavy upper wall in the presence of a uniform magnetic field using
a nonhomogeneous dynamic model is analyzed. The temperature of both the bottom and the near walls of the
vessel are hot, while the upper wavy surface is cold. The remaining vertical wall is considered adiabatic. A
Galerkin finite element method is applied to the governing equations, along with suitable boundary conditions.
The effects of a wide range of control parameters, such as the Hartmann number, magnetic field inclination
angle, gravity inclination angle, solid-volume fraction, nanoparticle diameter, and dimensionless time, on the
flow and thermal fields, are studied. The results show that early steady-state heat transfer occurs and that the
flow, thermal, and concentration fields become suitable for enhanced heat transfer with increases in the Rayleigh
number, wall wavenumber, nanosolid volumetric ratio, and geometry inclination angle, and with decreases in
the Hartmann number and the nanoparticle diameter. A 20% improvement in heat transfer can be achieved by
increasing the number of waves on the upper surface of heat transfer devices.

Journal: Thermal Science and Engineering Progress, Issue-19, 28/08/2020.
Shahrear Khan Rasel
Sr. Lecturer
Dept. of GED
Daffodil International University