To forget user account password especially administrator password is common in windows xp. But in this situation what to do to recover forgot administrator password in windows xp? I will show you a effective and easiest way to recover your forgot administrator user password in this post.
To recover your administrator user account password follow below instruction step by step :
1. Place your Windows XP CD in your cd-rom and configure the bios to boot your computer from cd-rom.
2. Keep your eye on the screen messages for booting to your cd Typically, it will be “Press any key to boot from cdâ€
3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.
4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now.
5. The Licensing Agreement comes next - Press F8 to accept it.
6. The next screen is the Setup screen which gives you the option to do a Repair.
It should read something like “If one of the following Windows XP installations is damaged, Setup can try to repair itâ€
Use the up and down arrow keys to select your XP installation (if you only have one, it should already be selected) and press R to begin the Repair process. See below picture
7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.
8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating “Your computer will reboot in 15 secondsâ€
9. During the reboot, do not make the mistake of “pressing any key†to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.
10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press
SHIFT + F10
. A command console will now open up giving you the potential for wide access to your system. See below picture
11. At the command prompt, type
NUSRMGR.CPL
and press Enter. You have just gained graphical access to your User Accounts in the Control Panel. See below picture
12. Now simply pick the account you need to change and remove or change your password as you prefer.
13. If you want to log on without having to enter your new password, you can type
control userpasswords2
At the command prompt and choose to log on without being asked for password.Now from here uncheck the "users must enter a user name and password to use this computer". After you’ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy). See below picture
14. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.
