Electric Safety on the Office

Author Topic: Electric Safety on the Office  (Read 1702 times)

Offline Sultan Mahmud Sujon

  • Administrator
  • Hero Member
  • *****
  • Posts: 2674
  • Sultan Mahmud Sujon, Sr. Admin Officer
    • View Profile
    • Helping You Office Operation & Automation Management
Electric Safety on the Office
« on: March 08, 2012, 09:40:08 PM »
Tips on Safety During Works:

    All Substation operations shall be performed by authorized persons.

    All Stations and gates to switch structure containing energized high voltage equipment shall be kept closed & locked at all times except during visit / works by qualified employees.

    Clearance are required to work on de-energized lines or equipment. The person receiving clearance shall test and ground all phase conductors or equipment before work begins.

    Each employee shall wear proper clothing during duty hours. Proper clothing also refers to appropriate footwear, helmets, gloves etc.

    Employees shall use approved safety belts & straps life line or other adequate protection as required.

    When working from a portable ladder, the ladder shall be securely placed, held, tied or otherwise made secure to prevent slipping or falling.

    All tools shall be kept in good working condition and shall be properly stored. Defective tools shall be taken out of service.

    When working on or near energized lines or equipment worker shall not go or take any conducting object within the following specified distance:



Offline Sima

  • Full Member
  • ***
  • Posts: 176
    • View Profile
Re: Electric Safety on the Office
« Reply #1 on: March 21, 2012, 10:33:54 AM »
Good post...
Sima Rani Dey
Lecturer
Dept. of Natural Sciences

Offline Sharmin Jahan

  • Sr. Member
  • ****
  • Posts: 266
    • View Profile
Re: Electric Safety on the Office
« Reply #2 on: March 22, 2012, 12:13:57 PM »
Effective post.